1) The Embedos EB Series ( EM Bose ) calcuates the volume of the liquid in the tank & displays its level. The calculation is done based on the inputs from a Pressure sensor that is mounted at the bottom of the tank. 2) The device displays real time values & level of the tank with a view of set points or Threshold Limits between which the liquid of interest should remain. 3) If the Liquid crosses either of the two setpoints, the device sets of a relay which is connected to a high wattage Industrial Lamp ( Bulb ) to indicate that the threshold has been crossed. Also, the device has a buzzer that goes off on the crossing.

Deployment Type: Data Logger +7 Inch HMI Display

“Embedos Engineering – 7 inch Data logger HMI, Model ERA021. (Simultaneous 2 channels)

It has 7 inch touch screen display to monitor sensor data graphically. It has options to start and stop data logging facility.

(External Start Stop for each channel via DI) Has USB port for pen drive connection. You can download the data log in excel format for selected date and time. 2 nos. Digital outputs for set point. – Just NPN outputs.

This was deployed in 2021, to log a particular set of parameters from a Caterpillar Engine ECU and display logged data.

The Embedos Monitoring Software was used to visualize logged data from the ECU in the form of charts and gauges, display log files in .csv formats and give options & download all log files into the system

Embedos Data Logger + Embedos Expansion IO Card take in an RS-485 input and  4 Analog Inputs Each to display Guages for 8 Analog Channels. Similarly displays a graph of the last 100 values of corresponding channels.

The Embedos Real Time software running on an Embedded Web Server on the master Data logger allows you to download data shown on the table in Excel, CSV or PDF formats directly.

Deployment Year: 2019 – 2022

Deployment Type: Multiple IO Data Logger + Browser based Web App.

The EDGE as a GLT controller provides an internal Modbus Server to read the analog and Digital inputs and control digital outputs.

EDGE calibration, test and network configuration options have been added to the latest iteration of this application of the EDGE.

The monitoring software stores historical data of each of the vibration units connected to it.

You can view this data in graphical form by right clicking on a card and selecting View History (Alternately, you can also Double Click on a card to open Graph window)