Deployment Year: 2022

Deployment Type: Embedos – IO Data Logger + 4G Gateway

The IO data logger is designed to log data to device as analog inputs, a pulse input which is to be converted to RPM value. The logger is able to also display real-time data on a webpage based utility.

The user can interact with the data-logger to configure and view all the settings and device parameters currently running on the device. The logger can store real-time data and send the same data via MQTT to a broker.

The IO data logger is provided with following connectivity interfaces:

  1. Wifi to connect to an SSID for MQTT data transmission and access to webpage.
  2. 4G to connect to a network for MQTT data transmission.
  3. The device is configured to monitor and log data of live parameters.
  4. Parameter 1 to 4 are analog input parameters corresponding to the devices 4 Analog inputs respectively. These parameters can be user configurable.
  5. Parameter 5 is RPM and will always output calculated RPM value measured through the EM’s Digital Input 1.

 

 

Embedos - EM_IO Data Logger + 4G Gateway_realtime

Embedos_EM_EMES_3.1.0_with_SSR-01-01

Embedos - EM_IO Data Logger + 4G Gateway_MQTT_config

Embedos - EM_ IO Data Logger + 4G Gateway_connection Diagram

Embedos - EM_IO Data Logger + 4G Gateway_Analog_diagnostic

Embedos_ EM_Edit_Configuration

Embedos - EM_IO Data Logger + 4G Gateway_Analog_before setpoint

Looking for End to End Industrial Automation & IoT Solutions? 

 

Our Experts Want to speak to You!

Explore Other Case Studies

Vertical Tank Monitoring - Embedos - Em Bose ( EB ) 3.2″ HMI

Tank Fill Control – Tank Level Monitoring!

1) The Embedos EB Series ( EM Bose ) calcuates the volume of the liquid in the tank & displays its level. The calculation is done based on the inputs from a Pressure sensor that is mounted at the bottom of the tank.

2) The device displays real time values & level of the tank with a view of set points or Threshold Limits between which the liquid of interest should remain.

3) If the Liquid crosses either of the two setpoints, the device sets of a relay which is connected to a high wattage Industrial Lamp ( Bulb ) to indicate that the threshold has been crossed. Also, the device has a buzzer that goes off on the crossing.

Embedo Em Dian – ( ED ) Enclosure

Dual Channel Analog Data Logger + 7” HMI

Deployment Type: Data Logger +7 Inch HMI Display

“Embedos Engineering – 7 inch Data logger HMI, Model ERA021. (Simultaneous 2 channels)

It has 7 inch touch screen display to monitor sensor data graphically. It has options to start and stop data logging facility.

(External Start Stop for each channel via DI) Has USB port for pen drive connection. You can download the data log in excel format for selected date and time. 2 nos. Digital outputs for set point. – Just NPN outputs.

Embedos_CAN based Forklift Reach Height Controller Display - main page

Can Forklift Controller – Reach Height Display

Deployment Year: 2018

Deployment Type: Data Logger + Display

Problem Statement: In narrow warehouses with high racks, the view and space to maneuver are often restricted.

The Embedos Forklift controller and display based on CAN Bus helps the driver with appropriate displays and assistance systems. This makes load handling safer and more efficient.

Embedos_CAN - J1939 Datalogging Dashboard showing decoded parameters in varied widgets

CAN-J1939 Data Logger & Modbus – TCP Gateway

This was deployed in 2021, to log a particular set of parameters from a Caterpillar Engine ECU and display logged data.

The Embedos Monitoring Software was used to visualize logged data from the ECU in the form of charts and gauges, display log files in .csv formats and give options & download all log files into the system

Embedos_Connection Diagram between Datalogger & Expansion Unit

Real Time Data Logger with Embedded Web App

Embedos Data Logger + Embedos Expansion IO Card take in an RS-485 input and  4 Analog Inputs Each to display Guages for 8 Analog Channels. Similarly displays a graph of the last 100 values of corresponding channels.

The Embedos Real Time software running on an Embedded Web Server on the master Data logger allows you to download data shown on the table in Excel, CSV or PDF formats directly.

Embedos_EDGE

Edge_Glove Test Controller

Deployment Year: 2019 – 2022

Deployment Type: Multiple IO Data Logger + Browser based Web App.

The EDGE as a GLT controller provides an internal Modbus Server to read the analog and Digital inputs and control digital outputs.

EDGE calibration, test and network configuration options have been added to the latest iteration of this application of the EDGE.

EmView-Vibration Monitoring Software - Spindle 1

Vibration Monitoring Software

The monitoring software stores historical data of each of the vibration units connected to it.

You can view this data in graphical form by right clicking on a card and selecting View History (Alternately, you can also Double Click on a card to open Graph window)

Embedos Engineering LLP

Embedos is an enabler of Edge Computing, Industrial IoT & Industry 4.0 - Hardware & Software Solutions.

Kindly enter details to allow a 1 - 1 personal consultation on Industry 4.0 Solutions.

Help us Help You leverage the power of IIoT!